BACK TO HOMEPAGE

CARBON CD1+ AC/DC CHARGER

We are proud to present our new range of hi-end chargers from VISTA, these are updated designs from the older VISTA range with high quality power supplies that allow the charger to output excellent charge rates while running on AC. No charger on the market can match the power and price point.

The CARBON CD1+ DUO Charger is a new twin output charger with 100 watts putput per channel on AC power! This means you can charge a pair of our 12Ah 6s battery packs in around 3 hours while plugged into the mains.

With the built-in power supply, total output is 200 Watts. Each channel is capable of charging all types batteries at up to 6.0A or 100w and discharge at 0.1-5.0A, the charger features a 4 fan cooling system and an internal sensor for controlling fan speed. Precision internal cell balancers, high contrast LCD display and important warning and safety functions are built in.

 

SPECIFICATIONS

       Input voltage: AC 220-240V / DC 11.0-18.0V

       Charge power: 2x100W

       Discharge power: 2x10W (20W)

       Charge current range: 0.1-10A

       Discharge current range : 0.1-5A

       LiIo/LiPo/LiFe cell count: 1-6 series

       NiCd/NiMH battery cell count: 1 - 15cells

       Pb battery voltage : 2V-20V (1-10cells)

       Current drain for balancing LiPo: 400mah/cell

       Battery data memory: up to 10 data

       Balance Charge and Storage Charge modes for lithium batteries

       Automatically controls current rate during charging and discharging process

       Two independent charger circuits charges two batteries simultaneously

       Two independent balancing ports for lithium batteries

       Five user customizable pre-set per output

       Fan cooling system with internal sensor for controlling fan speed

       Nicad/NiMH batteries can be set to Charge/Discharge or Discharge/Charge up to a maximum of 5 cycles

 

PRICE: AUD$220.00 inc GST

 

 

 

TERMS & CONDITIONS:

Riding an Electric bicycle can be a dangerous activity, OZ-eBikes cannot be held responsible for accidents or injury caused by your use of these products. Our warranty responsibility is limited to the products supplied only, and warranty is provided for the supplied products only if they are used as intended. Any modifications to the equipment, use of incorrect batteries or chargers etc will void the warranty.

 

Lithium batteries are dangerous and must be handled with care, if they are dropped and there is visible damage or deformation of the case you should seek expert advice before continuing to use the battery.

 

We highly recommend purchasing a small $10.00 steel toolbox from Bunnings or BigW to store your batteries in when not in use. Batteries should be stored outside the house. Batteries must be charged with a specified LiPo charger, we are not responsible for any issues that arise if you use a charger other than the ones we recommend. Our chargers are computer controlled and have advanced settings to ensure the battery cannot be left charging continuously, our chargers automatically shut off when the battery is fully charged. Regardless of this you should NEVER leave a battery unattended when charging, always be within the vicinity and check on the progress regularly.

 

OZ-EBIKES checks and records the battery pack voltage for every Lithium battery pack before we send them out. OZ-EBIKES then warrantees all packs to have proper assembly and cell voltage at time of purchase. In the event that a customer finds defects in materials or assembly workmanship when the goods are received but unused, OZ-EBIKES will replace such packs within Australia after inspection if they are deemed to be faulty.

OZ-EBIKES does not offer a general warranty for battery packs which have already been charged and discharged, or for which claims are made more than one week after receipt of said battery packs by the customer. Because the majority of Lithium Battery problems occur after initial use and are due to over charge/discharge of the packs, it is in most cases difficult to determine the cause of failure, and requires inspection by the manufacturer.

 

For packs that have been used and which the customer believes are defective, OZ-EBIKES & their manufacturer have agreed to have these inspected at the factory, and replaced if defects are found. In the event that the pack is found not defective or has been damaged by misuse, the pack may be returned to the customer if desired, at the customer's expense.

 

There is no warranty, expressed or implied, by the manufacturer, distributors or retailers with respect to capacity, life in cycles, storage or discharge characteristics available.

 

By purchasing any complete kit or individual parts from us you agree to these terms and conditions.

 

2014 OZ-EBIKES AUSTRALIA