BACK TO HOMEPAGE

 

I am an Industrial Designer and have been in the electronics business for 25 years with a long history of importing electronics and Lithium Battery technology into Australia. Oz-Ebikes is part of ERC Australia. I have been cycling for 30 years and actually ride both a regular flat bar road bike and an Electric MTB!

 

I donít just sell you a box of parts, each kit is checked and bench tested before being shipped out, all power leads are plugged up in house and we supply a parallel wiring harness for connecting two batteries if required. Our chargers are plugged up ready to program and use. All our chargers are c-tick compliant products and legal to use in Australia. Be careful of purchasing batteries with cheap plug pack chargers from Ebay or overseas as they are usually not c-ticked and are not legal to use, if a non c-tick charger was to fail or cause a fire you may not be covered by insurance!

 

Every part of the kit is chosen to work, gear ratios, brands of motor and freewheels, controllers, even the wiring I use when building bikes is high grade hi-temp silicon wire. I donít slap a kit onto a bike, all our complete E-bikes are custom built with wider handlebars in order to fit the brakes, gears and electrics properly, custom shifters when needed, new chains when the stock one is too short, little things that make the difference between a bike with a motor slapped on it vs a purpose built electric bike where everything fits and works together perfectly.

 

I can supply photos of layouts for wiring etc as they are quite complex to connect, the photo makes it simple and most of you will be able to connect the kit up with no trouble.

 

I have written instructions on the installation of the kits and supply them with each kit, and have many photos and tips on installing, how to run your wiring, where to fit things etc etc. If you need any help or advice I am only an email or phone call away, email is the better medium for technical questions as you can then go back over the information at your leisure.

 

The website is fairly basic but I donít believe the website is as important as the customer service behind it! I have prided myself with being customer orientated, during my 25 years of being in business I have only sold products I use/would use myself, this way its easy to be excited and passionate about what you do, I am never more happy than when a customer has success and gets the same enjoyment that I do from the product. OzEbikes is a small business for me, and I want to keep it small and personal so that it remains an enjoyable pastime!

 

 

My converted 500w Hybrid MTB, the frame is almost 30 years old, its a Tangealloy double butted Chrome Alloy frame! Very strong and light frame, with great feel. This bike has all the best gear on it for the period. Strong and perfectly suited to fast commuting and light trail riding.

 

 

My custom 2000w beast, running our new 2000w motor with the new 40A/80A controller and a pair of our 16Ah 25v LiPO battery packs in series for 50v, top speed 55kmh on the flat! Speed is not really what I am after though, the gearing on this bike has been optimized for climbing torque, this bike will climb gravel roads in the national parks that are near impossible to walk up! The gear ratio that comes with our standard kits is good for around 65kmh on 50v, and our motor can run up to 72v batteries although I do not recommend this generally as handling over 60VDC can be dangerous, and 65kmh is already deep in the danger zone for a bike!

 

 

LINK TO CUSTOMER BIKES & FEEDBACK

 

 

 

©2018 OZ-EBIKES AUSTRALIA